STIGhubSTIGhub
STIGhub— A free STIG search and compliance tool·STIGs updated 3 hours ago
Powered by Pylon·Privacy·Terms·Feedback·© 2026 Beacon Cloud Solutions, Inc.
← Back to Rancher Government Solutions (RGS) Harvester Government CTR Security Technical Implementation Guide

V-285760

CAT II (Medium)

Harvester Government platform must terminate all network connections after 10 minutes of inactivity.

Rule ID

SV-285760r1272392_rule

STIG

Rancher Government Solutions (RGS) Harvester Government CTR Security Technical Implementation Guide

Version

V1R1

CCIs

CCI-001133CCI-004068CCI-004192

Discussion

Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. In addition, quickly terminating an idle session will also free up resources committed by the managed network element. Terminating network connections associated with communications sessions includes, for example, de-allocating associated TCP/IP address/port pairs at the operating system level, or de-allocating networking assignments at the application level if multiple application sessions are using a single, operating system level network connection. This does not mean that the application terminates all sessions or network access; it only ends the inactive session and releases the resources associated with that session. Satisfies: SRG-APP-000190-CTR-000500, SRG-APP-000401-CTR-000965, SRG-APP-000880-CTR-000290

Check Content

Verify time to live (TTL) (in minutes) on a user auth session.

1. Access the Rancher MCM managing Harvester Government. Navigate to the hamburger menu >> Global Settings.

2. Locate the "auth-user-session-ttl-minutes" setting.

If "auth-user-session-ttl-minutes" is not configured to "10" (or less) minutes, this is a finding.

Fix Text

Configure the TTL (in minutes) on a user auth session.

1. Access the Rancher MCM managing Harvester Government. Navigate to the hamburger menu >> Global Settings.

2. Locate the "auth-user-session-ttl-minutes" setting.

3. Select the ellipsis (…) to the right of the parameter and select "Edit Config".

4. Edit the setting and configure it for 10 (or less) minutes.

5. Click "Save".